Filter
Top Products
5
2. On the handset, press and hold
[#/
→
]
until you hear a beep and
see HANDSET REGISTERING in the display.
3. When REGISTRATION COMPLETE is displayed, the handset
has been registered to the base. If REGISTRATION FAILED
appears, please try these steps again.
Resetting the Handset
If you want to register the handset to a different base or
replace a handset with another one, you must first clear the
registration information from the base and the handset.
1. Press and hold
[]
and
[#/>]
for at least 5 seconds, until
the SYSTEM RESET menu
appears.
2. Select the DEREGISTER
HS submenu by pressing
[select/ ]
.
WHICH HANDSET? appears in the display.
3. Use
[]
or
[]
to select the handset ID to be de-
registered from the list, and then press
[select/ ]
.
DEREGISTER HS appears.
4. Press
[]
to move the cursor to YES, and then press
[select/ ]
. You will hear a confirmation tone.
Resetting the Handset Without the Base
If the original base this handset was registered to is not
available for some reason (for example, it is lost or somehow
incapacitated), you can still reset the handset and use it with
another base.
1. Press and hold
[]
and
[#/>]
for more than 5 seconds.
2. Press
[
] to move the cursor to REPLACING BASE and
then press
[select/ ]
. REPLACE BASE appears.
3. Press
[]
to move the cursor to YES, and then press
[select/ ]
. You hear a confirmation tone, and the handset
deletes its own link to the base without trying to contact
the base.
4. Register the handset to the new base.