2
Compatible Bases
This handset is compatible with Uniden's 2.4 GHz Digital
Expandable phone system: the DCT756/DCT758 series, the
DCT746/DCT748 series, the DMX776/778 series, and the
DCT646/DCT648 series. Visit www.uniden.com for the most
up-to-date list of compatible bases.
Installing the Accessory Handset
Checking the Package Contents
Make sure your package contains the following items. If any
items are missing or damaged, contact our Customer Service
Hotline. See back cover page for contact information.
Installing the Battery
Follow the steps below to install the
rechargeable battery pack.
1. Using the finger indentation, press
in on the battery case cover and
slide it down to remove it.
2. Plug the battery connector into the
battery compartment jack. Be sure
to match the red and black wires to
the label near the jack.
3. Gently pull on the battery wires. If
the battery connector comes
loose, try connecting it again.
4. Replace the battery case cover
and slide it up until it clicks into
place.
Note: Use only the Uniden BT-1004 rechargeable battery pack
supplied with your cordless telephone.
•Cordless Handset
•Charging Cradle
•AC Adapter, model # AD-0005
Input: 120V AC 60 Hz
Output: 9V DC 210 mA
•Rechargeable NiMH Battery
Pack, model # BT-1004
Capacity: 500 mAh, 3.6V
•Beltclip
•Printed Material