Filter
Top Products
GETTING STARTED [ 21]
DirectLink Mode
Using the DirectLink Mode
1) Enter the “DirectLink Mode” menu (see “Entering the Menu” on page 20).
2) Press the ENTER soft key to enter the DirectLink
mode. You will hear a confirmation tone, and
“DirectLink Mode Complete” appears.
3) To return back to the normal mode, exit the DirectLink
mode. To exit the DirectLink mode, press the CANCEL
soft key, then the OK soft key, or return the handset to the cradle.
Handset Setup
Programming your Voice Mail Access Number
1) Enter the “Handset Setup” menu, then the “Edit Voice Mail” submenu
(see “Entering the Menu” on page 20).
2) Enter your personal access number using the number
keypad (0-9), /tone/
t, #/s, the PAUSE soft key, or
the DELETE soft key.
3) Press the OK soft key. You will hear a confirmation tone.
To delete the current Voice Mail Access Number, delete all numbers in step 2 using
the DELETE soft key and press the OK soft key.
Setting a Ringer Volume
1) Enter the “Handset Setup” menu, then the “Ringer Volume” submenu
(see “Entering the Menu” on page 20).
2) Press volume/
▲ or ▼ to adjust the ringer settings
(Ringer Volume Off, Ringer Volume Low, or
Ringer Volume High). You will hear a ringer or
melody at the Selected volume (if you select “Ringer
Volume Off”, no ringer or melody will sound).
3) Press the OK soft key. You will hear a confirmation tone.
GETTING STARTED
To enter
DirectLink mode
press [ENTER]
BACK BACK ENTER
Edit V
_
mail No.
1234567890
DELETE PAUSE OK
Ringer Volume
High
BACK OK
• If you select “Ringer
Volume Off”,
icon appears in
the display.
• If you press
volume/▲ in Ringer
Volume High or
volume/▼ in Ringer
Volume Off, you will
hear a beep.
DCT5260-2_UP301BH UP01301BZ_1 1/16/03 10:04 AM Page 21