Filter
Top Products
ABOUT SOFT KEY FUNCTION/TERMINOLOGY [ 9]
About Soft Key Function
In the standby mode In the talk mode
Soft key functions consists of soft key icons and soft keys (No. 1, 2, and 3). Each soft key corresponds to the
icon displayed above, and each icon will be changed depending on the operation. Press the corresponding soft
key to enter a menu, or select an item. In this manual, we refer to this combination of icons and keys as the
soft key.
For example, you will use the soft keys when you want to:
- Access the main menu
- Set up CIDCW options
- Access Caller ID messages stored
- Store or edit phone numbers
- Redial one of the last three numbers dialed from the handset
- Etc….
Note: The soft keys will not appear while charging the handset.
SUN 12:00A
Handset #1
New: 5
MENU CID
RDL
PB
Soft key 1 Soft key 2 Soft key 3
Talk 999:59
1234567890
MUTE MENU CWDX
Soft key 1 Soft key 2 Soft key 3
Throughout this manual, terms such as Standby and Talk Mode are used. Below is the terminology explanation.
Standby Mode - The handset is not in use, is off the cradle, and talk/flash or speaker has not been pressed.
A dial tone is not present.
Talk Mode - The handset is not in the cradle and talk/flash or speaker has been pressed enabling a dial tone.
“Talk” appears on the display.
Terminology
DCT5260-2_UP301BH UP01301BZ_1 1/16/03 10:04 AM Page 9