Open as PDF
TO TRANSMIT AND RECEIVE
The UH075 uses the 40 UHF-CB Channels. For your reference a list of the
available channels and corresponding frequencies is printed at the end of this
1. The maximum RF transmit power of
To switch to low power, press .
appears on the LCD.
To switch back to higher power, press
LOW indicator disappears from the LCD.
2. Before you transmit, listen for activity on the
3. When the channel is clear, press and hold the
TX appears on the LCD.
4. When you have finished speaking, release the
and listen for a response.
then disappears on the LCD.
The display shows
BUSY when a transmission
is being received by your radio.
Hold the radio with microphone approximately
five cms in front of your mouth with the
antenna at approximately 45* angle away from
your head. Speak in a clear, normal
UT01913ZZ_1 11/21/03 5:50 PM Page 11