TO TRANSMIT AND RECEIVE
The UH-052XR uses the 40 UHF-CB Channels. For your reference a list of
the available channels and corresponding frequencies is printed at the end
of this manual.
1. The maximum RF transmit power of
UH-052XR is 5 watts.
To switch to low power, press the
[1/5W]. LOW appears on the LCD.
To switch back to higher power, press
the
[1/5W] again. LOW indicator
disappears from the LCD.
2. Before you transmit, listen for
activity on the selected channel.
3. When the channel is clear, press
and hold the
[PTT] to transmit.
TX appears on the LCD.
Hold the radio with microphone approximately two inches in front of your
mouth with the antenna at approximately 45˚ angle away from your head.
Speak in a clear, normal conversational voice.
4. When you have finished speaking, release the [PTT] and listen for a
response. TX indicator then disappears on the LCD.
The display shows BUSY when a
transmission is being received by your
radio.
CTCSS
BCL VOX
CTCSS
OS/GS
LOCKDUP
PTT
switch
BCL VOX
CTCSS
OS/GS
LOCKDUP
8