Filter
Top Products
MULTI-HANDSET FEATURES [51]
www.uniden.com
Multi-Handset Features
The features in this section require a minimum of two handsets to operate. To add
additional handsets to your system, see "Expanding Your Phone" on page 14.
Using the DirectLink Mode
To use this feature, you must enter the handsets
into DirectLink mode first.
To enter DirectLink mode, see page 17.
DirectLink call
1) When the phone is in the DirectLink standby
mode, press the DirecLink soft key (example of
DirectLink from handset #1).
2) Select the handset to which you wish to DirectLink
with by pressing the number keys (0-9). Your handset
will then page the other handset.
3) On the receiving handset, press talk/flash, the
ANSWER soft key, or if Any Key Answer is on, press any
number key,
*
/tone/<, or #/>.
4) When you finish your conversation, press end or the
END soft key on either handset. Return the handset to the cradle, or press the
CANCEL soft key and then the OK soft key to return to normal standby mode
(cancelling DirectLink mode).