Filter
Top Products
14
Connecting the Base and Charging the Handset
Connect the AC adapter to the DC IN 9V jack.
CAUTION: To avoid risk of re and shock, only use the Uniden
AD-800 AC adapter.
Connect the AC adapter to a standard 120V AC wall outlet.
DO NOT use an AC outlet controlled by a wall switch.
Place the handset in the base with the LCD screen facing forward.
Make sure that the charge LED illuminates. If the LED does not
illuminate, check to see that the AC adapter is plugged in and the
handset makes good contact with the charging contacts.
Charge your handset at least 15 to 20 hours before plugging into
the phone line.
Connecting the Charger and Charging the Handset (Multi-handset packs only)
Connect the AC adapter to the DC IN 9V jack and to a 120V AC
outlet that is not controlled by a wall switch.
Caution: Use only the Uniden AD-0005 adapter.
Set the charger on a desk or tabletop, and place the handset in the
charger with the keypad facing forward.
Make sure that the charge LED illuminates. If the LED does not
illuminate, check to see that the AC adapter is plugged in and the
handset makes good contact with the base charging contacts.
Charge the handset battery pack for at least 15-20 hours before
using your new cordless telephone for the rst time.
1)
2)
3)
4)
5)
1)
2)
3)
4)
To AC outlet
To DC IN 9V
AC adapter (supplied)
To AC outlet
To DC IN 9V
AC adapter (supplied)
Route the
cord.
To AC outlet To DC IN 9V
AC adapter (supplied)
Route the
cord.
To AC outlet To DC IN 9V
AC adapter (supplied)