Filter
Top Products
Route the cord
To AC Outlet
AC Adapter
(supplied)
To DC IN 9V
GETTING STARTED
[7]
C. Connect the Base Unit and charging cradle, and Charge the
Handsets
1) Connect each AC adapter to the DC in 9V
jack and to each standard 240V AC wall outlet.
• Connect each AC adapter to a continuous
power supply.
• Place the base unit close to the AC outlet
so that you can unplug the AC
adapter easily.
2) Place one handset in the main base and the
other in the charging cradle with the keypad
facing forward.
3) Make sure that the charge/in use LED and
charge LED illuminate. If the LED does not
illuminate, check to see that the AC adapter is
plugged in and the handset makes good contact
with the cradle's charging contacts.
4) Charge the handset battery packs for at least 15-20 hours before using your
new cordless telephone for the first time! To maximize the charge capacity of
your battery pack, DO NOT plug the telephone cord into the base unit and wall jack
until the battery is fully charged.
! Use only the
supplied
AAD--041S
AC adaptor
for the base
and AAD-
600S AC
adaptor for
the charger.
! Do not use
any other AC
adapter.
! Do not place
the power cord
where it
creates a trip
hazard or
where it could
become
chafed and
create a fire or
electrical
hazard.