Filter
Top Products
Changing the Digital Security Code
To protect you against misbilled calls which might result from your phone being
activated by other equipment, the cordless phone provides AutoSecure (which
electronically locks your phone when the handset is in the cradle) and Random Code
digital security (which automatically selects one of over 262,000 digital security codes for
the handset and base).
If the handset battery pack is completely discharged or the battery pack is removed, the
digital security code will be lost. If this happens, a new security code is set automatically
the next time the battery pack is charged.
The digital security code is an identification code used to connect the handset and the
base unit. Normally, setting the code is not necessary. The first time you charge your
handset, the security code is automatically set.
In the rare situation that you suspect another cordless telephone is using the same
security code, you can change the code.
1) Remove the handset from the base unit. Press and hold the find handset key
on the base.
2) While holding the find handset key, place the handset in the base unit, and leave
the handset on the base for more than 3 seconds.
3) Remove the handset from the main base. Then place the second handset in the
main base and wait for more than three seconds. No need to hold the find handset
key this time.
4) Press the talk key on one handset. Once you make sure Talk appears on the
display, press the talk key again. Then, try with the second handset. If each
handset displays Talk, a new security codes set. Otherwise, return to step 1 and try
again.
ADDITIONAL INFORMATION
[33]