Filter
Top Products
GETTING STARTED
[11]
Register Handsets to the Main Base before Using!
Whichever handset you choose to charge in the main base will
automatically register to the main base.
The second handset (charging in the extra charging cradle) MUST
also be registered to the main base before use. Follow the steps
below to register the second handset.
1) Be sure both handsets are fully charged.
2) Remove the handset from the charging cradle, and place it in the
main base. The charge/in use LED light on the main base will
begin to flash, indicating that the registration is taking place.
3) Wait for at least 5 seconds, then remove the handset from the
main base.
4) Press the talk key on one handset. If Talk appears on the
display, the handset is registered, press the talk key. Then, try
with the second handset. If each handset displays Talk , a new
security code is set. Otherwise, return to step 1 and try again.
5) Once both handsets are registered, it doesn’t matter which
handset is placed in the main base or the charger.
! When you
charge the
handsets,
Caller ID
summary
screen and
the name of
the handset,
Handset
No.1
appears. If
Handset
No.2
appears, you
are charging
the handset
No.2.
! The charging
cradle can be
used to
charge either
handset.
e
e
Handset No.1