Filter
Top Products
BASICS[ 24 ]
Taking a call off hold
Press talk or pick up any handset and press talk to release the call from
hold.
- If a call is put on hold for more than 5 minutes, the unit will
automatically disconnect the call.
Multiple handset simultaneous conversation
The DCT4960-2 is a multiple handset system, but the unit allows only one
handset at a time to talk with an outside call. When a handset is using
the outside line, another handset cannot make another outside call.
However, other handsets can join the outside call conversation (see
Conference Call).
Intercom
Making an intercom call
You can make an intercom call to another handset.
1) Press int’com/delete.
2) The display will show “ICM To”.
3) Press the Handset ID that you want to make an intercom call. For
example, if you are using handset 1 and want to make an intercom call
to handset 2, then you will press 2.
- The intercom will be canceled if the Handset ID for the receiving
side is not entered within 10 seconds.
When the phone is in
standby mode, press
end to indicate the
handset ID number.
When you return the handset to the base or charger,
the handset ID is indicated on the display.
DCT4960-2 OM_ENG 9/18/01 4:25 PM Page 24