Filter
Top Products
E-15
Uniden MHS75 Radio Owner’s Manual
Using Your Radio
Changing the volume
To increase the speaker volume, turn the Volume-Power
knob clockwise; turn it counter-clockwise to decrease the
volume.
Setting the squelch level
The squelch feature
reduces static on the
speaker by ltering
out any background
channel noise. At the
lowest squelch level,
the speaker plays all
signals, including any
channel noise.
Setting the squelch
level higher lters out
noise and lets only
actual radio
transmissions through.
While listening to a channel, adjust the SQUELCH knob until
the noise is ltered and you can hear only the transmission.
If you switch to a channel with a lot of noise or a weak trans-
mission, you may need to readjust the squelch level again.
Note: Setting the squelch level too high may prevent
you from hearing weaker transmissions. If you are
having difculty hearing a transmission, try setting the
squelch level lower.
Changing the channel
Press the Channel Up and Channel Down buttons briey to
scroll through the channels one channel at a time. Press and
hold the Channel Up or Channel Down button to quickly
scroll through the channels.
Weak signals
No
Squelch
Medium
Squelch
High
Squelch
Strong signals
Noise