Filter
Top Products
17
If you subscribe to Caller ID service from your phone company, the phone automatically
displays the information the phone company sends between the first and second rings
of every call you receive. It stores up to 86 numbers only or name and number call
records in its Caller ID memory.
It also shows the date and time the call was received. The display also shows if caller
information is not available or if the sender chose not to send the information.
The new call LED flashes during an incoming call, and the Caller ID record
is displayed. The total Caller ID record is displayed for about 8 seconds, after the last
ring stops.
If you receive more than one call (without an accompanying message) from the same
phone number, RPT (repeat) is displayed, and the FP107 stores a single Caller ID record
for that number with the date and time of the last call. Any call with a voice message
will have a call ID record.
If only Caller ID records (both incoming messages and Caller ID records) are full, the
FP107 announces “Memory is full”, and CALLS MSG FULL appears. The FP107
answers calls after answer rings and plays “Message is full. Thank you for your call”.
Caller ID Messages
CALLER ID OPERATION
Display Description
CALLS MESSAGES Appears as new calls are received. xx is the number of new calls.
PRIVATE Appears when the caller has blocked the Caller ID information from
being sent.
OUT OF AREA Appears when the caller is not within a Caller ID service area. No caller
information appears.
ERROR Appears if there was an error during the transmission of Caller ID
information.
END OF CALLS Appears when you have reached the end of your call records.
TOP OF CALLS Appears when you have reached the top of your call records.
RPT Appears when you review a Caller ID record from someone who has
called more than one time from the same number.
-XX- -XX-
Name Tagging
If the caller ID telephone number exactly matches a number you have stored in memory,
the name stored in memory will be displayed with caller ID numbers.