Filter
Top Products
ADJUSTING THE RINGER VOLUME AND TONE
Ringer volume control
Locate the volume control switch at the rear of the
base.
Slide the ringer volume switch to the desired
off/lo/hi setting.
9
To avoid losing the day and time settings if AC power fails, we recommend you install
a backup battery before you set the day and time (see “Installing a Backup Battery” on
Page 5). Follow these steps so the FP107 can record the correct day and time each
message and memo is recorded.
1. Hold down until the FP107 beeps once.
2. Press 3 times until SUNDAY appears.
3. Repeatedly press or # to select AM or PM.
4. Press . The hour digit flashes.
5. Repeatedly press to set the correct hour.
6. Repeat Steps 4 and 5 to set the minute, month, date, and the day of the week.
7. Press .
If you do not complete
each step with-in 8
seconds, the FP107 exits
setup. Start again at
Step 1.
NOTE
store
store
VOLUME CONTROL
Handset volume control
While using the phone you can adjust the handset volume with
the control, located at the side of the base.
Speaker volume control
During a speaker phone conversation, you can adjust the speaker volume by sliding the
control (located on thr side of the base) until you hear the desired volume.
ringer volume
off / lo / hi
handset volume
hi
normal
speaker volume
min
max
mid
speaker volume
min
max
handset volume
hi
normal
mid
SETING THE CLOCK
store