Filter
Top Products
NOTE
The maximum length for
outgoing message is 60
seconds. As you record,
the message counter
shows the recording time.
OGM1 flashes on the
display if an out-going
message has not yet been
recorded.
NOTE
15
Recording Outgoing Messages
Before the FP107 can answer calls and record messages, you must record an outgoing
message (OGM).
1. To record the OGM 1 message, hold down until the timer starts counting.
OGM1 RECORDING is displayed.
2. Speak clearly at about 20cm from the front of the FP107 the message that you want
incoming callers to hear.
3. When you finish speaking, press . The FP107 beeps and plays back the outgoing
message.
stop
To Cancel ‘Call Diversion’
1. Pick up the handset
OR
Press .
2. Press - CALL DIVERT OFF is displayed - then press again
and hang up.
The telephone will automatically dial the access code 61# and will cancel the
diversion.
speaker
call diversion
dial
hold / answer
new call
new message
answer on / off
ogm
stop
call diversion
call waiting
block cid
play
delete
dial
Caller ID
TELEPHONE ANSWER DEVICE
ogm
hold / answer
new call
new message
answer on / off
ogm
stop
call diversion
call waiting
block cid
play
delete
dial
Caller ID
#