Filter
Top Products
MEMORY DIALING[ 22 ] www.uniden.com
Storing Phone Numbers and Names
Memory Dialing allows you to dial a number using just a few key presses.
Your cordless telephone stores up to 20 names/numbers in the handset.
1) Press
mem, ¨Select Memory¨ is displayed.
2) Press the
vol/ring/ or vol/ring/ key, or enter a number
(
01 - 20) to select the memory location where you would
like to store the number.
3) Press
mem or select.
4) Press
mem or select. The following screen appears and a
cursor flashes indicating that the display is ready for the
name to be entered.
If this screen appears, the selected memory location is
already stored. Then you must either edit the entry in
this location, delete the entry in this location, or select
¨
Go Back¨ to choose another location.
5) To enter a name (up to 13 characters), use the number keys.
• See the "Steps for Entering Names and Special Characters". (See page 24).
• Use the
#/ or
*
/tone/ key to move the cursor to the desired location.
• Use
delete/ch to delete characters as needed.
• Press and hold
delete/ch to delete all the characters.
• If a name is not required, go to step 6.
Select Memory
01
02 JOHN DOE
Store Name
Edit Memory01
Delete Memory01
Go Back
01:(Empty)
Press Select
to edit
• In memory dialing
operation, you must
press a key within 30
seconds or the phone
will return to the
standby mode. If you
return the handset to
the base, the phone
will return to the
standby mode also.
• You have 30 seconds
after pressing mem
to enter the number
you wish to store.
Otherwise, an error
tone will sound.