Filter
Top Products
GETTING STARTED[ 12 ] www.uniden.com
• Place the power cord
so that it does not
create a trip hazard or
where it could
become chafed and
create a fire or
electrical hazard.
• Use only the
supplied AD-446 AC
adapter. Do not
use any other
AC adapter.
• Connect the AC adapter to a continuous power supply.
• Place the base unit close to the AC outlet so that you can unplug the AC adapter easily.
C. Connect the base unit
1) Connect the AC adapter to the DC IN 9V jack
and to a standard 120V AC wall outlet.
2) Set the base on a desk or tabletop, and
place the handset in the base unit.
3) Make sure that the
charge/in use/voicemail LED illuminates.
If the LED does not illuminate, check to see that the AC adapter is plugged
in and that the handset makes good contact with the base charging contacts.
Route the cord.
• After installing the battery pack in the handset, charge your handset at least 15-20
hours before plugging into the phone line
.
4) Connect the telephone line cord to the
TEL LINE jack and
to a telephone outlet once the handset is fully charged.
Modular
If your telephone outlet isn't modular,
contact your telephone company
for assistance.