GETTING STARTED
GETTING STARTED [ 17]www.uniden.com
1) When the phone is in the standby mode, press and hold
cid/menu. The following screen appears.
2) Press the
vol/ring/ key three times to select ¨Dial¨.
3) Press
select to toggle between ¨Tone¨ and ¨Pulse¨ for
each setting.
4) Press
end or return the handset to the base unit to complete the setting.
The handset returns to the standby mode.
• If you are not sure of your dialing system, set for tone dialing. Make a trial call.
If the call connects, leave the setting as is, otherwise set for pulse dialing.
• If your phone system requires pulse dialing and you need to send the DTMF tones for
certain situations during a call, you may "switch-over" to tone dialing. (Refer to
"Tone Dialing Switch-over" on page 20.)
Setting the language
1) When the phone is in the standby mode, press and hold
cid/menu. The following screen appears.
2) Press the
vol/ring/ key four times to select ¨Language¨.
3) Press
select to toggle between ¨Eng¨ (English) and ¨Fr.¨
(French) for each setting.
4) Press
end or return the handset to the base unit to complete the setting.
The handset returns to the standby mode.