Filter
Top Products
6. Align the mounting slots on the
base with the mounting posts on the
wall. Push in and down until the
phone is firmly seated.
7. On the base, pull the handset retainer out
of the slot. Rotate clockwise 180°.
8. Flip the retainer from front to back.
Slide it back into the slot so that the lip of the
retainer is up and the oval is down. The
retainer holds the handset in place.
▼ Direct wall mounting
If you don't have a standard wall plate, you can mount your phone
directly to the wall. Before doing this, consider the following:
● Select a location away from electrical cables, pipes, or other items
behind the mounting location that could cause a hazard when
inserting the screws into the wall.
● Mount your phone near a working phone jack to avoid excessive
cord lengths.
● Make sure the wall material is capable of supporting the weight of the
base and the handset.
7
Before you plug the other
end of the telephone cord
into the modular jack on
the wall, charge the
battery (See CHARGING
THE BATTERY PACK,
page 11).
exs9650 User’s Manual.qxd 8/17/99 1:46 PM Page 7