Filter
Top Products
DO NOT use an
outlet controlled by a
wall switch.
▼ Standard wall plate mounting
This phone can be mounted on any standard telephone wall plate.
1. Snap the desktop/wall mount
adapter into the bottom of the base
as shown.
2. Plug the AC adapter into the base.
3. Place the AC adapter cord inside
the molded wiring channel.
Wrap the cord around the strain
relief notch.
4. Plug the AC adapter into a standard
120V AC wall outlet.
5. Plug one end of the short telephone
cord into the
TEL LINE 1/2
jack
on the back of the base. Plug the
other end into a standard
telephone jack.
If your second line has a separate
jack, plug the other cord into the
base and wall jack.
WALL INSTALLATION
6
Place the power cord so
that it does not create a
trip hazard or where it
could become chafed
and create a fire or
electrical hazard.
exs9650 User’s Manual.qxd 8/17/99 1:46 PM Page 6