Filter
Top Products
If you have Call Waiting service and a
call waiting tone sounds, press
flash
to
accept the call. After a short pause you will
hear the new caller. To return to the
original caller, press
flash
again. The flash
function on the base and handset are
independent of each other. You can
use your flash feature from either the
handset or the base.
The
redial
key redials the last number dialed. The redialed number
can be up to 32 digits long.
1. To call the last number dialed from
the handset, press
line 1
, then press
redial
.
or
Press
redial
, then press
line 1
.
If any key is pressed before
redial
,
the last number will not redial.
2. To call the last number dialed from
the base, press
line 1
, then
press
redial/p
.
If any key is pressed before
redial/p
,
the last number will not redial.
USING REDIAL
FLASH AND CALL WAITING
19
The flash feature does
not function when
line 1
and
line 2
are on
a conference call. (See
the 3-WAY CONFEREN-
CING and 4-WAY
CONFERENCING, pages
23 and 24.)
The EXS 9650 has two
independent Last Number
Redial memories, one in
the handset, the other in
the base.
exs9650 User’s Manual.qxd 8/17/99 1:46 PM Page 19