Filter
Top Products
5
Connect the base unit
If you want to install the base unit on the wall, see page 7.
To AC outlet
To telephone outlet
To TEL LINE
To DC IN 10V
AC adapter
(supplied)
Telephone line cord
(supplied)
2
3
Place the power cord so it
does not create a trip
hazard, or where it could
become chafed and create
a fire or electrical hazard.
1 Snap the desktop/wall mount
adapter into the top of the
base as shown.
2 Connect the telephone line cord to the TEL LINE jack and to
a telephone outlet.
3 Connect the AC adapter to the DC IN 10V jack and to a
standard 120V AC wall outlet.
4 Set the base unit on a desk or
tabletop and place the handset
on the base unit.
Then raise the antenna to a
vertical position.
Route the
AC adapter cord
EXR 2480 H1 99.8.20 3:42 PM Page 9