Filter
Top Products
9
Charge the battery pack for more than 17 hours before you start
using your phone.
1 Remove the battery cover.
2 Install the battery pack with
the label down.
3 Slide the battery cover
forward until it snaps into
place.
4 Place the handset on the
base.
Make sure that the
“
status
”
LED of the base unit lights,
and charging begins. Charge
the battery for at least 17
hours.
You can place the handset
either side up for charging
the battery.
status
LED
Label face
Use only Uniden Battery
BT-2499 supplied with
your phone.
Preparing the battery pack
EXR 2480 H1 99.8.20 3:42 PM Page 13