Filter
Top Products
[ 52 ]
* For Memo Record and Greeting Message Record function, the first time you enter
the corresponding command, it starts the Recording function. If you want to
stop the recording, enter the command again.
5)After all of the Help Guidance prompts have played, you hear intermittent
beeps indicating that the system is in the command waiting mode. You may
enter another command at this time from the chart.
6)When you are finished, hang up to exit the system. The answering system
automatically returns to standby.
Turn on the answering system remotely
If you have forgotten to turn on your answering system, you can turn it on
remotely from any touch-tone telephone.
1)Call your telephone number.
2)Wait ten rings until the system answers. You hear a beep.
3)Press
# and then enter your PIN code. The answering system announces the
number of messages stored in memory. You hear "To play incoming messages,
press pound two. For help, press pound zero".
4)Press
# then 6 to turn the answering system On. You hear the outgoing
message and a confirmation tone.
5)Hang up the phone and subsequent calls will be answered by the system.
THE INTEGRATED ANSWERING DEVICE
EXAI2248 2/8/2 7:05 PM Page 52