Filter
Top Products
[ 23 ]MEMORY DIALING
MEMORY DIALING
5)Press select. “Store Number” is displayed.
The cursor flashes indicating that the display is ready for
the number to be entered.
6)Use the number keys to enter the phone number.
The phone number cannot exceed 20 digits.
• Use
redial/p to enter a pause in the dialing sequence.
The display shows a “
P”. Each pause counts as one
digit and represents a two second delay of time
between the digits as they are sent.
• Use
delete/ch to delete digits as needed.
7)Press select. You will hear a confirmation tone and the
following display appears. Memory storage is complete.
For example, if you store a name and number into
memory location number 7, the display shows
“
Memory 7 Stored”.
After about 2 seconds, “
Memory Store” is displayed.
Repeat steps 2 - 7 to store more numbers.
8)Press
end to return to standby mode.
Store Number
8002971023
Memory 7 Stored
Memory Store
7 UNIDEN CORP
8 (Memory 8)
Store Number
• The pause feature is
useful for long
distance calling,
credit card dialing,
or sequences that
require a pause
between digits.
• The pause key
counts as one digit.
Pressing
redial/p
more than once
increases the length
of a pause between
numbers.
• The 10 memory
locations are
represented by the
numbers 0-9 on the
keys. If you store a
number in one of
the locations, then
attempt to store a
different number in
the same location
later, the new
number will
overwrite the
previous one.
EXAI2248 2/8/2 7:05 PM Page 23