Filter
Top Products
[ 42 ] THE INTEGRATED ANSWERING DEVICE
Setting the ring time
The ring time setting allows you to set the number of rings the caller hears
before your answering system plays the outgoing message. You can set the ring
time to answer after two, four, or six rings. Setting (Toll Saver), the
answering system picks up after two rings if you have new messages, and after
four rings if there are none. This way, if you make a long distance call to check
your messages, you can hang up after the second ring to avoid billing charges.
set/ringer menu
ans on/off find hs volume
greeting memo
skip/ffrepeat/rew
delete play/
stop
status
1)Press menu three times.
You hear “Ring time” and the current ring time ([ ] 2,
[ ] 4, [ ] 6, [ ] Toll saver), and it is displayed on
the base.
2)Press
repeat/rew or skip/ff until the desired ring
time appears.
3)Press
set/ringer to select the new ring time. You hear
a confirmation tone, then the announcement “Ring
time” and the new ring time is announced.
EXAI2248 2/8/2 7:05 PM Page 42