Filter
Top Products
Installing the Accessory Handset
Checking the Package Contents
Make sure your package contains the following items. If any items are
missing or damaged, contact your place of purchase.
Activate the handset
The handset is powered by a rechargeable
battery pack already installed in the handset’s
battery compartment. Before charging the bat-
tery for the st time, push the pin for activation,
located on the bottom of the handset (see label
with instructions). Once activated, remove the
label and pin and then place the handset in the
charger.
Notes:
Use only the Uniden (BT-446)
rechargeable battery pack supplied with
your cordless telephone.
Caution:
Keep magnetic items away from the
handset.
Don’t place the handset where it will be
subjected to direct sunlight for long periods
of time.
•
•
•
Cordless Handset
Charging Cradle
AC adaptor, model
No: AAD-7805WP
Input: 240V AC 50Hz
Output: 21V DC 100 mA
•
•
•
Rechargeable NiMH Battery
Pack, model No: BT-446
Capacity: 800 mAh, 3.6V
Beltclip
Printed Material
•
•
•
3