Filter
Top Products
5
Charging the Accessory Handset
The handset is powered by a rechargeable battery pack that
automatically recharges when the handset is placed in the
charger.
1. Connect the AC
adapter to the
DC IN 9V jack and to
a 240V AC outlet that
is not controlled by a
wall switch.
Caution: Use only
the Uniden AAD-600S
adapter.
2. Set the charger on a desk or tabletop, and place the
handset in the charger with the keypad facing forward.
3. Make sure that the charge LED illuminates. If the LED
does not illuminate, check to see that the AC adapter
is plugged in and the handset makes good contact with
the charging contacts on the charging cradle.
4. Charge the handset battery pack for at least 15-20 hours
beforeusingyournewhandsetforthersttime.
Registering the Handset
You must register the handset to the base before you can
use it. Only one handset can be registered at a time. (If
an accessory handset has previously been registered to a
base, you must reset the handset before you can register it
to a new base.)