Filter
Top Products
17
Using Hold, Conference, Transfer and
Intercom
Put a call on hold
Join a call in
progress
Transfer a call
Cancel a transfer
Accept a transferred
call
Make an intercom
page
Cancel a page
Answer an intercom
page
Press [int’com/hold]. If you leave a caller
onholdformorethanveminutes,thecall
will be disconnected. To return to the party
on hold, press
[ /ash] or [ ].
To join a call already in progress, press
[ /ash] or [ ]. You can hang up normally;
the other station remains connected to the
call.
Press [int’com/hold]; the call will
automatically be placed on hold. Use
[ ] or [ ] to select the station you want to
transfer the call to, and press the
OK soft key. (To page all stations at once,
select ALL.) When the other station answers,
you can talk to the station; the outside call
remains on hold. If the other station accepts
the call, you will be disconnected.
To cancel the transfer and return to the call,
press [ /ash] or [ ].
To answer the page and speak to the
transferring station, press [ /ash] or
[int’com/hold]. To accept the call and speak
to the caller, press [ /ash] again.
With the phone in standby, press
[int’com/hold]. Use [ ] or [ ] to select the
station you want to talk with, then press the
OK soft key. (If you select ALL, all other
stations will be paged.)
To cancel the intercom page, press the
CANCEL soft key or [ ].
Press [ /ash] or [int’com/hold]. If
AutoTalk is on, the handset automatically
answers the page when you remove it from
the cradle.