Filter
Top Products
19
Expanding Your Phone
Adding Accessory Handsets
Your phone supports a total of six cordless handsets. You can now place a fully-featured cordless handset anywhere
AC power is available to connect the handset charger. All the handsets ring when a call is received.
Compatible Handsets
Your phone is compatible with the DCX200, DWX207 and DCX300 accessory handsets. If you purchased an
accessory handset separately, you must register the handset to the base before use. Accessory handsets will not
operate until they are registered.
Charging Accessory Handsets
The handset’s battery recharges automatically when the handset is
placed in the charger.
Use the AC adapter that was supplied with your handset to
connect the
DC IN 9V jack to a standard 120V AC outlet.
Set the charger on a desk or tabletop, and place the handset in
the charger with the LCD screen facing forward.
Make sure that the
charge LED illuminates. If the LED does
not illuminate, check to see that the AC adapter is plugged
in and the handset makes good contact with the charging
contacts.
Charge the handset battery pack for at least 15-20 hours
before using your new handset for the rst time.
1)
2)
3)
4)
To AC outlet
To DC IN 9V
AC adapter (supplied)
Route the cord.
Caution: Use only the AC adapter supplied
with the accessory handset.
UC536BV(DECT2080-2) OM.indb 19 3/24/2008 4:53:57 PM