Uniden DECT1080 Cordless Telephone User Manual


 
[44]
Handset is not charging properly
Check that the charge light is on and that the
handset is sitting correctly in the base or
charger. Clean the charging contacts with a dry
cloth.
Are you using the power adaptor supplied with
your phone?
Handset will not link up with the base
Is the symbol flashing?if so, move closer
to the base as you are out of range.
Is the handset registered to the base?see
page 27.
Buzzing noise on my radio, TV, computer
or hearing aid. Sometimes your phone may
interfere with other electrical equipment if it
is placed too close. We recommend you
leave a distance of at least one foot to
avoid this.
Cannot make a call
Is the Call Barring set?see page 25.
Is the prefix dial set?see page 24.
CALLER ID
Caller’s details are not displayed
Have you subscribed to a CALLER ID service?
If not, contact your local telephone service
provider.
The caller may have withheld their details.
Let the phone ring a couple of times as
there may be a delay in receiving the
CALLER ID information.
TELEPHONE ANSWERING MACHINE
(DECT1080/DECT1080-2 only)
Not answering calls
Check that answering machine is turned on,
see page 39.
UC01501BB_0 8/9/06 2:50 PM Page 44