Filter
Top Products
English - 15
Choose this... To...
Edit
Edit this entry. The phone will prompt you to edit the name &
phone number.
Delete
Erase this entry from the list & allow calls from this number.
Blocking a Number
With the phone in standby, open the menu, select
Call Blocking,
then
Create New
.
Enter the name and number to be blocked. Press
MENU/OK
to save the entry
Using Multi-Handset Features
#
To use the features in this section, you need at least 2 handsets.
Expanding Your Phone
Your base supports a total of 12 cordless handsets, including any that came
with your phone.
You must register accessory handsets to the base before using them. Handsets
that aren’t registered display a "not registered" message. For registration
instructions, see page 23 or the accessory handset manual.
Using Conference Calling
When an outside call comes in, two handsets can join in a conference call with
the outside caller.
To join the call, just press
TALK/FLASH
. To leave the conference call, hang up
normally; the other handset remains connected to the call.
Using Privacy Mode
To activate Privacy Mode on a call in progress, press
MENU/OK
twice. As long as
privacy mode is on, no other handsets can join your call.
Privacy Mode turns off automatically when you hang up or put the call on hold;
you can also turn it off by pressing
MENU/OK
twice again.
Call Transfer
To... Press...
transfer a call
Select
Hold/Transfer
from the off-hook menus. The
system
puts the call on hold and prompts you to select
all handsets or a specific handset to page. When the
other handset accepts the page, you'll be connected in an
intercom call. Press
TALK/FLASH
to transfer the outside call
to the other handset.
cancel a transfer
TALK/FLASH
to return to the call.
accept a transferred
call
TALK/FLASH
to answer the page and speak to the other
handset. Then, press
TALK/FLASH
to speak to the caller.