Filter
Top Products
English - 13
USING SPECIAL FEATURES
Using the Base Ringers
Visual Ringer
The visual ringer blinks for the following conditions:
New messages
Incoming call - outside line
Incoming call - page
Incoming call - intercom or intercom hold
You can change the brightness of the base visual ringer. The
ViSUAL RiNGER
switch
is on the right-hand side of the base. Slide the switch to
HigH
,
Low
, or
off
. (It
doesn't affect the audio ringers.)
Audio Ringer
The
AUDiO RiNGER
key is also on the right-hand side of the base. Each time you
press the key, it will cycle the base ringer tones through 4 steps: High, Medium,
Low, and Off.
Using the Audio Boost
You can increase the earpiece volume for normal calls and intercom calls. During a
call, press
BOOST
. Press
BOOST
again to turn it off.
Silent Mode
You can silence the ringers on the base and all handsets at the same time. It
doesn't affect the visual ringers.
With the phone in standby, press and hold
SiLENT
on the base. The phone
automatically turns on the answering system and shows
Silent Mode On
in the
display on each handset. (The answering system answers any incoming calls
without playing anything through the speaker.)
You can also press and hold
#/SiLENT
on the handset. The
Silent Mode
menu
displays. You can choose to have silent mode always on or select a duration
from 1 - 9 hours.
To cancel, press
SiLENT
or
#/SiLENT
again.
#
If you turn the answering system off while Silent mode is on, the phone
turns off Silent mode.
Using Caller Announce
With the Caller Announce feature, you can turn on Text To Speech so your phone
can announce names in different situations.
You have to turn on Caller Announce separately for each handset (see p. 8).