Filter
Top Products
English - 9
Make a call normally. When you hear the prompt that asks you to enter your
number, open the phonebook and find the entry. Press
MENu/sELEcT
to send
the code. If you change your mind, just close the phonebook.
Using Call Waing
x Call Waiting, a service available from your telephone provider, lets you
receive calls while you are on another call. Caller ID on Call Waiting
(CIDCW) service displays Caller ID information for a waiting call.
x If you get a Call Waiting call, the phone sounds a tone. Press
TaLk/fLash
to
switch between the current call and the waiting call; each time you switch,
there is a short pause before you’re connected to the other caller.
Using a Voice Mail Service
x If you subscribe to a voice mail service, your phone can notify you when
you have a new message waiting. This feature supports Frequency-Shift
Keying (FSK) message notification. Contact your voice mail provider for
more information.
x When you have new messages, the
sTaTus
LED on the handset blinks, and
the display shows a message icon.
x After you listen to your messages, the voice message icon turns off. If it
doesn’t, you can reset it. With the phone in standby, open the menu and
select Global Setup; select VMWI Reset, then select Yes.
USING THE ANSWERING SYSTEM
Answering System Opons (
Answering Setup
)
You can set or change the answering system options from the handset. Just
open the menu and select Answering Setup. Select one of the following:
Menu Option What it does
Security Code
Enter a 2-digit PIN so you can access your answering system
from any touch-tone phone (see p. 11).
Ring Time
Set the number of rings (2, 4, or 6) before the system
answers (see p. 12 about Toll Saver).
Record Time
Set the amount of time (1 or 4 minutes) callers have to leave
a message. The system records up to 12 minutes 30 seconds
of messages. Choose Announce Only if you don't want the
system to let callers to leave a message.
Message Alert
Have the base beep every 15 seconds when you have a new
message. The alert stops after you listen to all your new
messages or if you press any key on the base.
Ans. Language Change the language of the system's voice prompts.
Call Screen Turn on the call screen feature on the base (see p. 11).