Uniden D1481 Cordless Telephone User Manual


 
8 - English
Finding the Handset
With the phone in standby, press
fINd
on the base. The handsets beeps for 1
minute. To cancel, press
fINd
again or press a handset key.
Using the Phonebook, Caller ID, and Redial Lists
x The phone can store up to 70 entries in its phonebook.
x If you subscribe to Caller ID (CID) service, the phone stores the information
for the last 30 received calls to the CID list. Contact your telephone provider
for more information.
x The handset remembers the last 5 numbers you dialed on it.
To... Press...
open the list
phoNEbook/LEfT, caLLEr Id/rIghT
, or
rEdIaL/pausE
.
scroll through the list
up
or
dowN
.
dial the current entry
TaLk/fLash
or
spEakEr
.
add 1 at the front of CID number
*
before dialing for a toll call.
store the current CID or redial
entry to the phonebook
MENu/sELEcT
, then select Store Into Pb.
Edit the name and number as needed.
edit the current phonebook entry
MENu/sELEcT
, then select Edit.
delete the current entry
MENu/sELEcT
, then select Delete (or
Delete Entry). To confirm, select Yes.
close the list
phoNEbook/LEfT
.
# When it’s in standby, the handset shows how many calls came in
since the last time you checked the CID list.
Adding Phonebook Entries
With the phone in standby, open the phonebook. Press
MENu/sELEcT
and then
select Create New. Proceed to enter a name and number.
x Enter the phone number (up to 20 digits) exactly as you would dial it.
x If you need to enter a pause between the numbers, press
rEdIaL/pausE
; you’ll
see a P in the display. (The dialing will pause for about 2 seconds per a digit.)
x To edit the number, press
cLEar
to back up the cursor and delete numbers.
Re-enter the correct numbers.
Deleng All the Entries
With the phone in standby, open the list (phonebook, CID, or redial). Press
MENu/
sELEcT
and then select Delete All. To confirm, select Yes.
Chain Dialing
If you often have to enter a series of digits or a code number during a call,
you can save that code number as a regular phonebook entry and use the
phonebook to send the code number.