Filter
Top Products
EXPANDING YOUR PHONE [55]
www.uniden.com
From the base to a handset
1) During a call, press
intercom
on the base. The call will automatically be placed on hold.
2) Select the handset you want to talk with by pressing the number key (
1-4
). To page all
the handsets press
*
/tone
. An intercom tone sounds. To cancel the transfer, press
intercom
or (speaker) on the base.
3) On the receiving handset, press
talk/flash
or
hold/transfer/int'com
to answer the page.
Or press any number key,
*
/tone/
←
, or
#/
→
(when Any Key Answer is On), or pick up
the handset from the cradle (when AutoTalk is On). The intercom mode is activated, but
the caller is still on hold.
4) To speak to the caller, press
talk/flash
or
speaker
on the receiving handset.
Replacing the Base
If the base unit is replaced with a different base from this same series of cordless models,
you must clear handset (s) and base identification numbers. To do this, select "System
Reset" from handsets display menu option list (see page 26 for guidance).
EXPANDING YOUR
PHONE