Uniden DCX 640 Cordless Telephone User Manual


 
BASICS [27]
www.uniden.com
Making and Receiving Calls
This handset has a built-in speakerphone that allows you to have a hands-free
conversation. This feature allows you to communicate easily while performing
other tasks, such as cooking. appears during hands-free conversations.
You can easily switch a call from normal conversation to hands-free
conversation. To switch a call, press
speaker
during the call.
From the Handset
From the Base
Normal conversation Hands-free conversation
To answer a call
Handset On the Cradle
Pick up the handset (AutoTalk) or
pick up the handset and press
talk/flash.
Handset Off the Cradle
Press any number key,
*
/tone/
, or #/
(Any Key Answer), or
press talk/flash.
Handset Off the Cradle
Press speaker.
Press (speaker).
To make a call
Handset Off the Cradle
1) Press talk/flash.
2) Listen for the dial tone.
3) Dial the number.
OR
Dial the number, and then press
talk/flash.
Handset Off the Cradle
1) Press speaker.
2) Listen for the dial tone.
3) Dial the number.
OR
Dial the number and then
press speaker.
1) Press (speaker).
2) Listen for the dial tone.
3) Dial the number.
To hang up Press end or return the handset to the cradle (AutoStandby). Press (speaker).
To enter a
pause within
the dialing
sequence
When you dial the number in standby mode, press redial/
pause.
P
appears in the display, which represents a pause.
Press (speaker).
When you dial the number
press pause.
•To set Autotalk, see
page 22 or to set
Anykey Answer see
page 23.
•The handset
microphone is located
at the bottom of the
handset (see "Controls
and Functions" on
page 8). Position
yourself as near to the
handset as possible
and speak clearly.
•If the line is in use by
another handset(s),
Line In Use
appears in the display
of all registered
handset's display, that
are not in use.
note
BASICS