Filter
Top Products
GETTING STARTED [19]
www.uniden.com
Global Setup
If you change one of the Global settings, you change the setting for all additional handsets.
Only one handset can change Global settings at a time.
System Reset
System Reset is used to clear the handset's ID from the main base unit, or the base ID from the handset.
Submenu option Description
Day & time Set the day and time of your display (see page 24).
CIDCW (Default is
CW on/CWDX off)
Set the Caller ID on Call Waiting (CIDCW) setting. CIDCW performs the same as
regular Caller ID on a call waiting number (see page 24). Call Waiting Deluxe
allows you to handle call waiting calls in seven different ways (see page 49).
Area Code
Store or edit the area code. If you enter a 3-digit area code number in the"Area
Code" option, your local area code does not appear in the Caller ID message. For
calls received from outside your local area code, you will see a full 10-digit number
(see page 24).
Note: If your calling area requires 10-digit dialing, do not program this option.
Dial Mode
(Default is tone)
Set the dial mode to tone or pulse (see page 25). Most phone systems use tone
dialing, which send DTMF tone through phone line. The default is tone dialing.
Depends on your dialing system, set the dial mode.
Copy Phonebook
Allow you to transfer the phonebook data stored in one handset to another
handset (see page 25).
Voice Mail Tone
(Default is on)
If your service does not support SDT message signal, set your VMWI (Visual Message
Waiting Inculcator) not to detect SDT message signal (see page 26).
Submenu option Description
Deregister HS
Clear the handset ID from the base. Use this option, for example, when you
change the digital security code (see page 26).
Replacing Base
Clear the base ID. Use this option, for example, if you wish to deregister the base
to use the handset with another base of the DCT series (DCT646/DCT6465/DCT648/
DCT6485 series) (see page 26).
GETTING STARTED