Filter
Top Products
Remote Operation
You can operate your
XCAI680
while you’re away from home by calling from any touch-tone phone.
When using this feature, remember these important guidelines.
l
You should change your Personal Identification Number (PIN) before using your Handset.
When you first apply power, the code is set to 0000.
l
You cannot change the Time and Day Stamp or your PIN code from a touch-tone phone.
Using a Touch-Tone Phone
You can operate your Answering System using any touch-tone telephone. Use this function to
check for recorded messages, play or delete messages, or even record a new outgoing message.
1.
Call your telephone number.
2.
During the outgoing message playback, press
R
followed by your PIN number.
Note: If the answering machine is switched off, wait
until after the fifteenth ring and your answering
system will switch ON automatically. Now
enter
#
followed by your 4 digit PIN number.
For example, use
aa@@@
Note: This number will be the 4 digit
PIN number you chose to replace the factory
preset PIN number 0000. Refer to page 40 to
change your PIN number.
3.
The Answering System announces the Time and Day Stamp followed by the total number of
new messages stored in
memory.
4.
You then hear intermittent beeps indicating that the system is in the Command Waiting Mode.
Note: You must enter a command within 20 seconds or the Answering System hangs up and
returns to Standby.
5.
Use this chart to select the function you want.
Function
Press
Repeat
#1
Play
#2
Skip
#3
Delete Message
#4
Answer On/Off
#5
Stop
#6
Record OGM
#7
Play New Message
#8
Replay OGM
#9
Help Menu
#0
6.
When you’ve finished, hang up to exit the system.
Your Answering System automatically returns to
Standby.
53