Filter
Top Products
Setting Caller ID on Call Waiting
Note: This feature is not currently available in Australia.
You can set your
XCAI680
phone to display information about calls that generate a call waiting tone
while you are on a call.
Note:
With this feature set you will not be able to hear the person you are talking to for a brief period
after you receive the call waiting tone.
To turn Caller ID on Call Waiting on:
1.
Remove the Handset from the Base Unit.
2. Press
flash/function
twice.
3. Press
1.
4.
Press
mem.
A confirmation tone sounds and the display
remains on for two seconds.
5.
Replace the handset in its cradle on the base unit for the
new setting to take effect.
To turn Caller ID on Call Waiting off:
1.
Remove the Handset from the Base Unit.
2. Press f/ash/function twice.
3. Press
0.
4.
Press
mem.
A confirmation tone sounds and the
display remains on for two seconds.
5.
Replace the handset in its cradle on the base unit
for the new setting to take effect.
25