Filter
Top Products
Recording Your Personal OGM
1.
To record an outgoing message, press and hold
ogm.
Start recording your message after you hear the
long tone and the Message Counter LED begins to
count up.
2.
Do not get closer than 30 cm to the microphone, and
speak clearly while recording your message. When
you are finished recording, release ogm.
You will hear a tone, and your message will play on
the Base Unit speaker.
Nofe:
You can leave up to a
60-second
outgoing
message.
Important:
If
REC Time Switch is
set
to ANN, make
sure you use the preset ogm for announce
only purpose.
preset message or your outgoing message.
1.
Press ogm.
Your recorded outgoing message will begin to play.
Selecting a Preset OGM
After you have recorded an outgoing message, you can set your Answering System to play either a
2.
While your recorded outgoing message is playing, press ogm again.
43