Filter
Top Products
[47] SETTING UP THE ANSWERING MACHINE
www.uniden.com
3) Press
[select/+]
or
[select/
-
]
to select ON or OFF.
4) Press
[menu/set]
. You will hear a confirmation tone.
Setting the Number of Rings
The ring time setting allows you to set the number of rings the caller hears before your answering machine
plays the outgoing message. You can set the ring time to answer after two, four, or six rings. If you enable
the Toll Saver, the answering machine picks up after two rings if you have new messages and after four
rings if there are none.
1) Press
[menu/set]
on the base.
2) Press
[select/
-
]
to move the pointer to select RING TIME, and
then press
[menu/set]
.
3) Press
[select/+]
or
[select/
-
]
to select a Ring Time (TOLL
SAVER, 2 TIMES, 4 TIMES, or 6 TIMES).
4) Press
[menu/set]
. You will hear a confirmation tone.
Activating the Message Alert
The Message Alert feature sounds a short alert tone every 15 seconds whenever you have a new
message. Once all new messages have been played, the alert tone automatically stops beeping until you
receive another new unplayed message.
1) Press
[menu/set]
on the base.
2) Press
[select/
-
]
to move the pointer to select MESSAGE
ALERT, and then press
[menu/set]
.
SETTING UP THE ANSWERING
MACHINE