Filter
Top Products
INSTALLING THE PHONE [16]
www.uniden.com
Direct Wall Mounting
If you don't have a standard wall plate, you can mount your phone directly to the wall.
Before doing this, consider the following:
• Avoid electrical cables, pipes, or other items behind the mounting location that
could cause a hazard when inserting screws into the wall.
• Try to mount your phone within 5 feet of a working phone jack to avoid
excessive cord lengths.
• Make sure the wall material is capable of supporting the weight of the base and
handset.
• Use #10 screws (minimum length of 1-3/8 inches) with anchoring devices
suitable for the wall material where the base unit will be placed.
1) Insert two mounting screws into the wall, (with their appropriate anchoring
device), 3-15/16 inches apart. Allow about 1/8 of an inch between the wall and
screw heads for mounting the phone.
2) Refer to steps 1 through 10 on page 15 to mount the telephone.
INSTALLING THE PHONE