Filter
Top Products
Using Your ANA 9710 Base Unit
Although most of the ANA 9710 operations are performed at the
Handset, there are two operations performed at the Base Unit.
The
power/status
LED (2) blinks whenever the Handset is connected
to a call.
Using the Hold
The
hold
button (1) is used in conjunction with a desk top phone to
switch from the Handset to a desk top phone.
1. If you need to use a desk top phone which the ANA 9710 is
connected to, press
hold
on the Base unit then pick up the desk
top phone.
2. To resume using the Handset, press
hold
on the Base unit, then
press
talk
on the Handset. The Handset resumes functioning as
before.
Using the Page/Find
The
page/find
button (3) is used to locate the Handset. Pressing
page/find
will send a ring signal to the Handset.
Note: The Handset Ringer must be on and set to Type A, B or C in
order for the page/find function to work.
33
1. Hold Button
2. Power/Status LED
3. Page/Find Button