Filter
Top Products
1. Insert two mounting screws
into the wall 3-15/16 inches
apart. Allow about 3/16 of an
inch between the wall and
screw heads for mounting the
phone.
2. Plug and secure the AC Adapter cord by following steps 2 and
3oftheStandard Wall Plate Mounting.
3. Plug one end of the telephone
line cord into the
LINE
jack on
the Base Unit. Optionally, plug
one end of a standard 2500
type desk phone into the
PHONE
jack. Then place the
telephone cord(s) inside the
molded channel(s) on the
bottom of the Wall Mount
stand.
4. Place the Base Unit on the
posts of the wall screws and
push down until it is firmly
seated.
14