Filter
Top Products
15
INSTALLATION
INSTALLATION
SELECTING A LOCATION
Select a location that is near both a telephone socket and
an AC outlet.
CONNECTING THE DTAM TO THE TELEPHONE LINE
To connect the DTAM to the phone line, plug one end of the
supplied modular cord into the jack on the back of the DTAM
labelled “line”. Then plug the cord’s other end into a telephone
socket.
If you wish to connect both the DTAM and a telephone to
the telephone line, simply use the two way splitter supplied.
Plug the splitter into the telephone wall socket then plug
the DTAM into one side of the splitter and the phone into
the other side.
FUNCTIONS
FUNCTIONS
14
Play
Plays messages also pauses messages during playback.
Memo
Records a memo/message.
Repeat
Repeat the current message.
Code Set
Sets the call breakthrough code (CBT)
Skip
Skips to next message or if held down speeds up
during playback.
Time set
Sets the time/date.
Stop
Stops message playback.
No messages stored in the machine
Number of messages stored eg: 7
Announcement 1 - Outgoing Message
Announcement 2 - Announce Only Message
Announce Only
Battery Low or not installed
Clock Set
Playback Paused
Messages Deleted
Memo Record
Set Call Breakthrough (CBT) Code
Set Security Code
LED Display
3653 Uniden 7100A Booklet 27/7/98 1:09 PM Page 14