Uniden 550W Two-Way Radio User Manual


 
14
You can also select any one of the 7 channels manually.
1. Press the scan/vibrate button to stop scanning.
2. Use the up or down button to move to a higher or lower channel.
3. To resume scanning, press the scan/vibrate button again.
Silent Keypad
A tone sounds when any button is pressed. This is the default setting. This function may be
silenced if you wish. To silence the tones, press and hold the MON button while you turn
on the radio. If you want to hear the tones again, press and hold the MON button while
you turn on the radio. When the radio is turned off and then on again, the last selected
setting remains.
LCD Backlight
The LCD display can be illuminated to assist your viewing. Press the light/lock button to
turn on the display backlight. The light goes off automatically after 5 seconds.
External Microphone and Speaker (Optional)
Available as an optional accessory. Use only an original Uniden speaker/microphone.
Use of any other speaker/microphone may void your warranty. To purchase your external
accessory, contact your local Uniden dealer or call Customer Service at (800)297-1023
Monday through Friday, 7:00 a.m. to 7:00 p.m. Central time.
This function will also silence call tones and error tones.
To change the channel continuously, press and hold the up or down
button for more than 1 second.
FRS550W.qxd 7/25/00 18:10 Page 14