Uniden 200 Two-Way Radio User Manual


 
E-16
Common Questions
Problem Things to Try
The radio won’t turn on. Charge the radio.
The radio does not
charge.
Make sure the Battery Switch is in the
Ni-MH
position (refer to page 6).
Make sure you installed Ni-MH
batteries.
Make sure the AC adapter is fully
connected to the multifunction jack.
Replace the batteries.
The radio won’t transmit.
Make sure you are not in scan mode.
Make sure you are not trying to transmit
on a receive-only channel (see the
channel lists starting on page 18 through
page 24.
Check the battery power level; charge
the battery before trying to transmit.
Make sure the duration of each
transmission is less than 3 minutes.
Specifications
General
Channels
All US/International/Canada marine
channels
10 Weather channels
Frequency Range 156 ~ 164 MHz
Frequency Control PLL
Frequency Tolerance
Transmit: 1.5 PPM (at 77°F/25°C)
Receive: 1.5 PPM (at 77°F/25°C)
Operational Temperature -4°F (-20°C) to +122°F(+50°C)
Antenna Flexible
Antenna Impedance 50Ω