Filter
Top Products
USING CALL FEATURES
■
7
SPEED DIALING
Save up to 10 frequently called numbers for
easy, one-touch dialing. Plus, you can save up
to 3 emergency numbers. Once the number is
saved, simply lift the receiver and press the
desired Speed-Dial button to place a call.
NOTE: Speed-Dial buttons must be pro-
grammed with the desired number before they
will dial. To program the Speed-Dial buttons
see “Saving Phone Numbers ” on the next
page.
REDIALING THE LAST NUMBER
When you get a busy signal, you can call back
later with the press of a button. The
button automatically calls the last number
that was dialed. Just lift the handset and press
the Redial button.
USING FLASH
Some telephone service features like Call
Waiting or 3-Way Calling require a “h o o k
flash” which is a very brief interruption of the
connection like hanging up the phone for one
second.
When using hookflash during a conversation,
press the button. There is a brief click
or silence on the line. If using Call Waiting,
the second call should now be connected.
ADJUSTING OUTGOING VOLUME
If the person you are talking to tells you that
they cannot hear you very well, you can
increase the volume of your outgoing voice by
pressing the button.
When this feature is on, you can still increase
the volume of what you hear up to 15 db.
USING HOLD
You can place a call on hold by pressing the
button.
To use the Hold feature during a conversation,
press the button. Confirm that the red
light above the button is lit. As long as
this light is on, the person on the other end of
the line cannot hear what you are saying.
When you are ready to resume your
conversation, press the button a second
time. You can also resume your conversation
from another telephone on the same line. This
is done by hanging up the handset while the
CrystalTone is on hold, then picking up the
handset of the second phone. The CrystalTone
is automatically hung up.
USING MUTE
You can mute your outgoing voice by pressing
the button.
To use the Mute feature during a conversation,
press the button. Confirm that the red
light above the button is lit. As long as
this light is on, the person on the other end of
the line cannot hear what you are saying.
When you are ready to resume your
conversation, press the button a second
time.
MUTE
MUTE
MUTE
MUTE
HOLD
HOLD
HOLD
HOLD
FLASH
REDIAL
USING CALL FEATURES